Be careful not to push the key further into the lock. To use, insert the key extractor along the edge of the cut side of the key. With a narrow pin, clip or other object poke into the slot and simply push the key out as shown. The back side of the cylinder will have a slot in it. If your home has Schlage door hardware (and some other brands), the easiest and quickest way to remove a broken key is to take apart the lock to expose the back side of the cylinder. Push the Broken Key Out of the Back of the Cylinder You can use a paperclip or small screw driver to orient the cylinder to the position that allows the pins to move freely and the key to come out. Just remember how you normally insert the key. Sometimes, lock cylinders are installed upside down. The cylinder must be returned to it’s normal vertical position to remove a broken key.įor most home hardware, the correct key position for extraction is with the cuts of the key pointing up. They cannot move up, out of the way to remove the key. If the cylinder is turned when the key breaks, the pins lock the key in place. When the key is inserted into the lock the pins rotate with the key along a shear line so the lock cylinder can spin. Inside the cylinder, there are pins, which correspond to the cuts in the key. If needed, use a pair of thin pliers to grip the broken key part as you try to pull it out.When a Working Key is Turned, the Red Pins Shown Will Lock the Key in Place So It Can’t Be Removed ![]() If you are using a spiral type of extractor, spin the tool instead of twisting.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |